Over the past week, some users have reported that they encountered an error installing the Windows 7 driver. To do this, you just need to unplug the USB key from the Windows 7 installation, wait a bit, and plug it back into the USB port. When you’re done, try booting from your installation USB and install Windows 7 to see if your error message persists.
Windows Vista Ultimate Windows Vista Home Premium Windows Vista Home Basic Windows Vista Enterprise Windows Vista Business Windows Vista Ultimate 64-bit Windows Vista Home Premium 64-bit Windows Vista Home Basic 64-bit Windows Vista Enterprise 64-bit Windows Vista Professional 64 -bit Windows 7 Enterprise Windows 7 Home Basic Windows 7 Home Premium Windows Professional Windows 7 Starter Windows 7 Ultimate More…Less
To resolve this issue, check out the scenario that best describes your situation:
How do I fix the required cd/dvd drive device is missing while installing Windows 7?
If you see that the device driver for the required CD/DVD drive is missing, you can try repairing this tool by simply unplugging the USB drive and then plugging it back into your computer u. After that, you should be able to install Windows 7 using a USB key without any problems. If the error persists, your company should try a different USB city.
The CD/DVD drive may not be compatible with Windows 7 and Windows Vista
If your CD/DVD is not compatible with the Microsoft AHCI driver (msahci.sys), your controller hard drive may be configured for AHCI in the main system BIOS. You may be able to fix the problem simply by disabling AHCI mode for the game controller in the BIOS. There are several manufacturers and BIOS versions. Everyone should read your system’s documentation and visit your PC manufacturer’s website for instructions on how to do this conversion option. Basic
Note. The process of changing these hard drive controller settings requires waking the computer from sleep mode and entering the program’s BIOS. The most common way is to press F2 to enter settings (other computers may use a different key). On the BIO screenS look for a setting that suggests AHCI, ATA, or possibly RAID. If the setting is set to AHCI, change it to ATA. Restart your computer with the Windows installation disc
Warning. Incorrect settings in the system BIOS can cause the PC to malfunction. If you do not have sufficient reason to configure the system BIOS, contact your PC manufacturer for assistance.
If you’re still unable to boot your entire computer from the Windows 7 and Windows Vista installation CD, see more options for installing Windows below:
Do you mind that when you install Windows 9 from a USB stick, all the necessary device drivers for CD/DVD drives are actually missing? Do you need to look for a solution to solve a problem? If your answers are correct, you can get solutions from MiniTool in this article
How do you fix a media driver your computer needs is missing error Windows 7?
Solution 1: Reconnect your USB flash drive Try the steps in the following sections: 1) If you see my error message, click Cancel. 2) Windows installation will return, then disconnect the called USB drive from the computer. 3) Reconnect the USB drive to your computer. 4) Try installing Windows again.
You are concerned that Windows cannot be installed, what will this disk be like MBR disk, GPT disk or dynamicWhat disk? Find the most important solutions to continue installing Windows.
This article offers customers two ways to install Windows 7 in UEFI mode.
Installing Windows 10 using a USB flash drive is by far the easiest and most convenient way to install the Windows operating system. However, at the same time, a common “missing part of the CD/DVD drive device driver” problem occurs when it is included in the installation, which further confuses you because you don’t even have a specific drive. Although a failed sale attempt indicates that the problem was caused by misplaced drivers, you should be aware that the driver may not be the problem. Read on to find the answer and solutions to this problem.
The problem is that the USB key is not recognized by Windows PE (Windows Preinstallation Environment). Windows PE is based on the Windows 7 kernel or is used to prepare a specific computer for Windows installation. So if your USB drive is not recognized by Windows PEin a unique way, you may run into problems and not be able to install the application. Try the problem solutions below.
How do I bypass driver install on Windows 7?
If you receive the error “Select the driver you want to install anyway”, click Cancel. (This will take you back to the first setup screen)Remove and reinsert the USB installation media.Now try allowing them to install Windows.
Simply unplug the USB stick and plug it back into the device and the problem should be gone. You may not believe it, but an idea is the simplest and most valuable solution to problems.
Quick and Easy PC Repair
Is your computer running a little slower than it used to? Maybe you've been getting more and more pop-ups, or your Internet connection seems a bit spotty. Don't worry, there's a solution! ASR Pro is the revolutionary new software that helps you fix all of those pesky Windows problems with just the click of a button. With ASR Pro, your computer will be running like new in no time!
If disabling doesn’t work, try a different control port. If you are using a USB 3.0 port, switch it directly to 2.Port 0 and try installing the system again.
Incorrect USB settings in the BIOS can also cause the problem. 7. Windows installation media does not natively support USB3.0. So if your new BIOS has a setting for USB3.Support 0 at boot, set it to AUTO or DISABLE.
Installing Windows may cause some driver issues, so check if any driver error occurs after installing Windows 9. Go to the manager to check the device based on driver status. If you see a yellow tick next to a device in Device Manager, the user has a problem. Next to the driver conditions can be a yellow label like this: