You are currently viewing How To Fix Error Code 0000000a Parameter1?

How To Fix Error Code 0000000a Parameter1?

 

Quick and Easy PC Repair

  • 1. Download and install ASR Pro
  • 2. Open the program and click "Scan"
  • 3. Click "Repair" to start the repair process
  • Enjoy a faster

    Sometimes your computer may return an error with error code 0000000a parameter1. This problem can be caused by a number of reasons.

     

     

    This comment provides a workaround to safely stop the 0x0000000A “” error message when the processor exits the C1 lazy state.

    Symptoms

    When the processor on a Microsoft Windows Server 2003-based computer resumes the computer from a completely idle C1, the computer may stop responding. Additionally, you may experience one or more of the following symptoms:

    • The computer will automatically restart.

    • error code 0000000a parameter1

      After logging in, you will receive the following error message:


      Quick and Easy PC Repair

      Is your computer running a little slower than it used to? Maybe you've been getting more and more pop-ups, or your Internet connection seems a bit spotty. Don't worry, there's a solution! ASR Pro is the revolutionary new software that helps you fix all of those pesky Windows problems with just the click of a button. With ASR Pro, your computer will be running like new in no time!

    • 1. Download and install ASR Pro
    • 2. Open the program and click "Scan"
    • 3. Click "Repair" to start the repair process

    Microsoft Windows
    A fatal error has been fixed in the system.
    A log of these errors was generated.
    Please report this issue to Microsoft.
    We have created a fatal error report that you can send to me to help us improve Microsoft Windows. We will also keep this report anonymous and confidential.
    Click here to see what data files this bug report contains.

    If you keep getting every error message and want the view For any new data contained in the error, click the “Click here” link at the bottom of the messages section. Then you will see information about the error signature, which usually looks like this:

    BCCode: 0000000A BCP1: BCP2 0f6ff8c0: 000000ff BCP3: 00000000 BCP4: 8074867e OSVer: 5_2_3718 SP: 0_0 Product: 272_3

  • On every blue screen, you will receive the following Stop error message:

    A problem has been detected and Windows has been shut down to prevent damage to the computer.
    Technical information:
    *** STOP: 0x0000000A (0x0f6ff8c0, 0x000000ff, 0x00000000, 0x8074867e)
    IRQL_Not_Less_Or_Equal

  • An error message that clearly resembles the following is logged in the system event log:

    Date: Date
    Source: SystemError time: time
    Category: (102)
    Type: error
    Event ID: 1003
    User: N / A
    Computer: Computer
    Description: Error code 0000000A, Parameter 1 0f6ff8c0, Parameter 2 000000ff, Parameter 3 00000000, Parameter 4 8074867e. For more information, see the Help and Support Center at https://support.microsoft.com. Data: 0000: 53 79 seventy three 74 65 6d 20 45 System E0008: 72 72 6f 72 25 20 45 72 rror Er0010: semfifty two 6f 72 63 20 6f sixty four 65 ror code0018: 20 30 but then 30 30 30 30 37 00000 0A0020: 30 20 20 50 sixty one 72 61 6d 0 Param0028: 60 74 65 72 73 20 sixty six 66 eters ff0030: 66 66 sixty six 66 64 31 2c

  • Reason

    This issue occurs due to a processor error on some processors. Byte

    Commands are read from the command cache in fixed-size sections (cache lines). If the bytes making up one instruction cross some sort of cache line boundary, the human bytes occupy multiple adjacent cache lines of the wrong cache line for the application. This behavior leads to incorrect instructions.

    error code 0000000a parameter1

    The Ntkrnlmp.exe file included in hotfix 840987 contains the sequence of these instructions that identifies this error.

    Workaround

    To work around this issue, do not allow the processor chip to enter c1 standby mode. To do this, follow these steps:

    1. Start writing an editor. To do this, click the Start button, select Run, type regedt32, and then click OK.

    2. Find and click the next subsection belowcountry HKEY_LOCAL_MACHINE System CurrentControlset Control Session: Manager Power

    3. Click Modify, point to New, select DWORD Value, and enter IdleFrom0IdlePercent.

    4. Right-click And Idle By0idlepercent, then click Modify. In the Modify DWORD Value dialog box, enter a number greater than 100 in the value data form, click Decimal under Radix, and then click OK.

      Note

      The following two subsections of the laptop or computer control when Windows puts the model in the C1 state where nothing happens: HKEY_LOCAL_MACHINE System CurrentControlset Control Session Manager Power IdleFrom0Delay HKEY_LOCAL_MACHINE System CurrentControlset Control Session Manager Power IdleFrom0IdlePercent
      For example, this assumes users have set the IdleFrom0IdlePercent value to 10 and the IdleFrom0Delay value to 5. In this case, the method should be 5-10% inactive for the microseconds when the processor goes into the C1 lazy state. Therefore, if you set a specific IdleFrom0IdlePercent value to a number, usually greater than 100, the processor will never enter the C1 lazy state.

    Status

    Microsoft has confirmed that this is a common issue with the Microsoft solutions listed in the “Applies to” section.

    • 4 minutes to read.
    • The manifestation of a stop error depends on your computer’s system error settings. For more information, click the article number to view the text in the Microsoft Knowledge Base: 307973 How to customize Windows error system and troubleshooting options
    • The four parameters contained in the classic error information differ depending on the particular configuration.
    • “Stop All 0x0000000A” problems are caused by a problem described in this valuable article.

    This issue only occurs after a new interprocessor interrupt (IPI) has appeared in the CPU control system, which causes the processor to exit from a C1 fault condition.

    This Task Method or Action section provides information about modifying the registry. However, if you edit my registry incorrectly, serious problems can arise. Therefore, make sure that allyour family is following these steps closely. For added protection, back up your computer before modifying it. Users can then restore the registry if a problem occurs. For more information about backing up and restoring the registry, click the following publication number to view an article in the Microsoft Knowledge Base:
    322756 How to back up and restore Windows registry in Windows

    The following two PC registry subkeys control when Windows places a label in the C1 lazy state: HKEY_LOCAL_MACHINE System CurrentControlset Control Session Manager Power IdleFrom0Delay HKEY_LOCAL_MACHINE System CurrentControlset Control Session Manager Power IdleFrom0IdlePercent
    For example, suppose a person sets the IdleFrom0IdlePercent value to 10 and the IdleFrom0Delay value to 5 to help you in the state. Thus, if you set the actual IdleFrom0IdlePercent to a number greater than 100, the processor will never enter the C1 do-nothing state.

     

     

    Enjoy a faster

     

     

     

    Codigo De Erro 0000000a Parametro1
    Felkod 0000000a Parameter1
    Kod Oshibki 0000000a Parametr1
    오류 코드 0000000a 매개변수 1
    Fehlercode 0000000a Parameter1
    Code D Erreur 0000000a Parametre1
    Kod Bledu 0000000a Parametr1
    Codice Errore 0000000a Parametro1
    Foutcode 0000000a Parameter1
    Codigo De Error 0000000a Parametro1