Sometimes your computer may display an error code that tells you how to troubleshoot your aiwa car stereo. There are many reasons that can cause this problem.
Quick and Easy PC Repair
Issues And Additional Corrective Actions
… The system is in stop mode. Press N (or CD
Aiwa is a consumer electronics company that manufactures a wide range of home theater systems. Like most home theater systems, Aiwa Excellent Surround systems include a set of speakers connected to an AV receiver that processes signals from other components for you, such as a great TV or DVD player. Each speaker is connected to the Aiwa with a two-wire cable. If you are having problems with your Aiwa system, troubleshooting the device can fix the problem and avoid billing for repairs.
Lift the key tabs on the speaker terminal on the back of the Aiwa to make sure each 2-wire wire is fully inserted, then press the tab to lock the wires in place.
Press the levers located directly at the rearth part of each speaker to make sure the cables are properly connected to each speaker in Aiwa, the new system. If one of two or more strands of the wire becomes loose, speaker 1 will not work.
Press the appropriate Surround button on the Aiwa remote while the receiver is turned on. You are using surround sound mode. Increase the volume of business in the system by pressing the “+” button on the village controller or by turning the volume on the Aiwa clockwise.
Press the Test button to turn on the Aiwa. A test tone is played to each speaker connected to the receiver to confirm that all speakers are in working order.
Disconnect all speakers that cannot generate a test tone, how to connect one speaker, you fully understand how to work with wires. Re-run the test sequence in conjunction with the remote control to isolate most of the problem from the specific speaker. If this is not the second speaker, the connection terminals of the receiver or amplifier are insidethe housings may be more damaged and need to be repaired.
Select the balance control on the front of the Aiwa so that the notch is vertical to the button rather than actually to the left or right. If the balance adjustment is directed to one side or the other, some of the opposite speakers will not be heard>
Play the DVD or CD with Surround Label Sound after playback. make sure you and your family are using a truly protected surround sound disc. Stereo CDs should only be recorded with 2-channel music, not surround sound.
James Clarke started his dog career in 1985. He has contributed to a wide variety of publications and websites on electronics, equipment repair and outdoor topics. He has over four years of experience in repairing equipment and electricity. Clark holds a BA in Political Science.
Name = “POST346081″>
Registered: 05 June
I recently found a supportUsed Aiwa CDC-X437 for my best 1996 Honda Accord. I used my old headunit to connect the wiring harness to the new headunit. I am pretty sure I have connected all the wires correctly (they are color coded or color coded of course) and clogged the wiring harness.
It is powered by the main unit and appears to be operating normally, except that there is no sound. I can say that it would be nice for me to play CDs, because there is no doubt about the equalizer display. Does anyone know what might be wrong? Thanks in advance.
494 – Registration date: April 5
Have you got a great seat belt that fits between the head unit belt and the factory belt? Sometimes they don’t quite match.
If this is not your carrier, you can try almost all wired speakers. This can most likely be done by touching each speaker with an AA battery (one wire to support each battery terminal) to make sure most Your speakers are working properly and are connected correctly.
Registered: 05 June
I’m sure the speakers are working, I cranked my old main unit all the way up and it worked fine. The factory controller and wiring harness was the same, can I just have a faulty drive or is there something else that could cause human problems?
Registered: May 05
Posted on To try and check each person’s mounting position. Make sure the consumers are not touching metal, that is, make sure there is no better ground for your main unit other than the mixer wire itself. Ditto for me, and it turned out that one of my speakers was touching my body, which only made it sound.
Aiwa 카 스테레오 문제 해결사
Narzedzie Do Rozwiazywania Problemow Z Samochodowym Stereo Aiwa
Aiwa Auto Stereo Fehlerbehebung
Solucionador De Problemas De Estereo De Coche Aiwa
Aiwa Autoradio Probleemoplosser
Sredstvo Ustraneniya Nepoladok Avtomobilnoj Stereosistemy Aiwa
Risoluzione Dei Problemi Dell Autoradio Aiwa
Solucionador De Problemas De Som Do Carro Aiwa
Aiwa Bilstereo Felsokare
Depannage De L Autoradio Aiwa